Why Mechanical Seals ?

One of the most important advantages of the mechanical seal is its low leakage rate, resulting in a cost saving because of the reduxtion in lost liquid.
The hazards of fire and personal injury are also reduced when the pumps are handling inflammable or toxic products. Simplified pump designs and reduced maintenance costs are also plus factors.

Mechanical Seals Online Shopping in USA by mechanical-seal The Most Common Seal Consists of a stationary flat seat which is mounted into a gland or seal chamber, a spring loaded rotating face and a static seal along the shaft. The spring holds the rotating face to the stationary face and sealing occurs between the parallel faces. The static seals stop leakage between the shaft and the rotating seak head and also behind the stationary seat. The faces of the Mechanical Seal in operation do not actually rub against each other, but are separated by a thin lubricating film a few molecules thick. This can account for the slight weepage from some seals that are operating satisfactorily.

Since all the wear is on the seal faces, further savings are realized due to elimination of shaft or sleeve wear which would result in use of packing.
Most Seal applications will runs years with little or no maintenance. Time formerly spent on adjustment of packing can be used elsewhere.

Read More

General Service of Metal Bellows

Metal Bellows seals can seal with Flexible Graphite instead of a rubber boot or O-Ring Elastomers allowing it to be used in higher temperature applications. No Springs to clog. Metal Bellows seals are a very effective method of maintaining Mechanical Seal face pressure on the seal face.

Metal Bellows seals that do use O-Rings only require one static o-ring to seal off any leakage along the shaft in Chemical Service this o-ring can be Aflas, EPDM, Nitrle, Viton, Encapsolated PTFE, Ameri-rez, or PTFE.
Because the O-Ring is static it will not wear on the shaft. When installed correctly metal bellows seals will provide exceptionally long service. Metal bellows seals are and excellent solution on chemical applications where Kalrez, Chemrez,Viton, FKM, Buna, Aflas or EPDM are not compatible.
For many years an inexpensive form of metal bellows seals have been used very successfully in the waste water / sewage industry and in the agricultural fields pumping irrigation water. These Mechanical Seals were generally made of a formed bellows rather than a welded bellows. Welded bellows seals are much stronger and have superior flex and recovery characteristics which are more ideal to holding seal faces together but cost more to manufacture. Welded metal bellows seals are less prone to metal fatigue and are available in single and double ply.

General Service of Metal Bellows

Read More